The Best Way To Clean Your Guitar
At some point everybody wonders how to clean your guitar,
hopefully sooner rather than later. It is obviously easier to keep it clean than make a major project out of
it. It's a bit like cleaning your room!
Taking care of your guitar is easy, and enjoyable; you will get to know your
instrument better and connect with it in a new way. You will soon be playing away with your favorite blues, lead or
rock songs; don't forget to look good too!
Cleaning the guitar body
Gloss finish guitars can be cleaned with a damp cloth to remove the
obvious grime and smudges. Next you should use a polish to protect the finish and bring out the gloss and beauty of
the wood. One great spray that has been used for years is Martin Guitar Polish. This is made especially for
acoustic wood and will give great results.
In the past a lot of guys have used car polish paste. This certainly works, but also
has the tendency to leave a white pasty residue in any nooks, crannies or cracks. For the tiny price of the Martin
Guitar Polish, it just makes sense to use something made for guitars!
All you need for a polishing cloth is a piece of flannel cloth. If you are
really picky, you can buy a micro fiber cloth because it is a bit finer and leaves less swirl marks that only you
know about. The Lizard Spit Micro Fiber Polishing Cloth is a great choice. You can keep it in the bag
and store it in your case to keep your guitar all clean and spiffy!
Satin finish guitars must not be cleaned with a paste, such as the car wax
paste. You want to keep the nice, satin look. The Martin Guitar Polish is a great spray that will clean and seal the wood and keep the
finish looking like new.
Whatever you do, never use an abrasive cleaner on your guitar. It will damage the
gloss and satin finish and require extensive work to repair.
Vintage finishes often have very thin finishes and can be easily
damaged. You should get the advice of a professional before doing it yourself.
Cleaning the fretboard
Unpainted fingerboards can be cleaned with 000/0000 steel wool, which is
extremely fine. Most Ebony and Rosewood fretboards are unpainted and can be brought back to an almost new condition
quite easily.
If you are cleaning an electric guitar, make sure you cover the pickups, otherwise
the little hairs of steel wool will cover them. If the fretboard is really cruddy, you might need some Naphtha
cleaner to remove it. This actually helps with playing chords and lead.
Painted fingerboards must be treated the same way as the glossy body
approach mentioned above. Nearly all Maple fretboards are painted and must be treated as such.
A little lemon oil, or mineral oil does wonders for the wood and will also act to
help prevent cracks. It also has great cleaning abilities and is good for the wood.
Polishing the frets might seem silly, but the nice, smooth surface is great for
easier playing and note bending. You can accomplish this with the 000/0000 steel wool, just pay attention to work
the frets evenly. This really helps with the blues and lead guitar playing.
This kit contains everything you need for your
fingerboard, frets and body. Even if you only have a beginner guitar, take care of it.
Take good care of your guitar and it will love you for it! Now, you can get going by
learning to play guitar online!
|